Start drive channel locate

The start driveChannel locate command identifies the drive trays that are connected to a specific drive channel by turning on the indicator lights for the drive tray that is connected to the drive channel.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles

To execute this command on an storage array, you must have the Storage Admin role.

Context

Use the stop driveChannel locate command to turn off the indicator lights on the drive tray.

Syntax

start driveChannel [(1 | 2 | 3 | 4 | 5 | 6 | 7 | 8)] locate

Parameter

Parameter Description
driveChannel The identifier number of the drive channel that you want to locate . Valid values for the identifier number for the drive channel are 1 , 2 , 3 , 4 , 5 , 6 , 7 , or 8 . Enclose the drive channel identifier number in square brackets ([ ]).