Update SNMP community

The set snmpCommunity command creates a new name for an existing Simple Network Management Protocol (SNMP) community.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles

To execute this command on an storage array, you must have the Storage Admin or Support Admin role.

Syntax

set snmpCommunity communityName="snmpCommunityName" 
newCommunityName="newSnmpCommunityName"

Parameters

Parameter Description
communityName The name of the existing SNMP community that you want to rename. Enclose the SNMP community name in double quotation marks (" ").
newCommunityName The new name that you want to give to the SNMP community. Enclose the SNMP community name in double quotation marks (" ").