Save storage array diagnostic data

The save storageArray diagnosticData command saves the storage array diagnostic data from either the controllers or the environmental services modules (ESMs) to a file.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.


To execute this command on an storage array, you must have the Storage Admin role.


You can review the file contents at a later time. You can also send the file to technical support for further review.

After you have saved the diagnostic data, you can reset the NVSRAM registers that contain the diagnostic data so that the old data can be overwritten. Use the reset storageArray diagnosticData command to reset the diagnostic data registers.

Attention: Run this command only with the assistance of technical support.


save storageArray diagnosticData [(controller | tray)] 


Parameter Description
diagnosticData This parameter allows you to download the diagnostic data from either the controllers or the ESMs.

The file path and the file name to which you want to save the storage array diagnostic data. Enclose the file name in double quotation marks (" "). For example:

file="C:\Program Files\CLI\logs\"

This command automatically saves the data to a compressed file; however, this command does not automatically append a file extension to the saved file. You must specify the .zip extension when entering the file name.