Set host channel

The set hostChannel command defines the loop ID for the host channel.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles

To execute this command on an storage array, you must have the Storage Admin role.


	set hostChannel [hostChannelNumber] 
preferredID=portID;

Parameters

Parameter Description
hostChannel

The identifier number of the host channel for which you want to set the loop ID. Enclose the host channel identifier number in square brackets ([  ]).

Use a host channel value that is appropriate for your particular controller model. A controller tray might support one host channel or as many as eight host channels. Valid host channel values are a1 , a2 , a3 , a4 , a5 , a6 , a7 , a8 , b1 , b2 , b3 , b4 , b5 , b6 , b7 , or b8 .

preferredID The port identifier for the specified host channel. Port ID values are 0 to 127 .