Set storage array local user password or SYMbol password

The set storageArray localUsername command and the set storageArray symbol command allow you to set a local user name password or a SYMbol password for a particular role.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.


To execute this command on an storage array, you must have the Storage Admin, Support Admin, Security Admin, or Storage Monitor role.


set storageArray (localUsername={ admin | storage | security | support | monitor}
| symbol [userRole={admin | monitor}]) 
password="string" adminPassword="string"


Parameter Description
localUsername Allows you to specify the user to change the password. Valid choices are: admin, storage, support, monitor, and security.
symbol Allows you to change the SYMbol password. Valid choices are: admin and monitor.
Note: This is the replacement command for the deprecated set storageArray password command.
password Allows you to specify the password for the role.
adminPassword Allows you to specify the admin password, which is required to set any new password.


SMcli -n Array1 -c "set storageArray localUsername=storage password="newPassword" adminPassword="theAdminPassword";"
SMcli -n Array1 -c "set storageArray localUsername=admin password="newAdminPassword" adminPassword="theAdminPassword";"
SMcli -n Array1 -c "set storageArray symbol userRole=admin password="newSymbolPassword" adminPassword="theAdminPassword";"

SMcli completed successfully.