You can use this worksheet to record FC storage
configuration information. You need this information to perform provisioning
tasks.
Recommended configuration
The illustration shows a host connected to a DE
Series storage array in two zones. One zone is indicated by the blue
line; the other zone is indicated by the red line. Any single port has two paths to the storage (one to each controller).
Host identifiers
| Callout No. |
Host (initiator) port connections |
WWPN |
| 1 |
Host |
not applicable |
| 2 |
Host port 0 to FC switch zone 0 |
|
| 7 |
Host port 1 to FC switch zone 1 |
|
Target identifiers
| Callout No. |
Array controller (target) port connections |
WWPN |
| 3 |
Switch |
not applicable |
| 6 |
Array controller (target) |
not applicable |
| 5 |
Controller A, port 1 to FC switch 1 |
|
| 9 |
Controller A, port 2 to FC switch
2 |
|
| 4 |
Controller B, port 1 to FC switch
1 |
|
| 8 |
Controller B, port 2 to FC switch
2 |
|
Mapping host
| Mapping host name |
|
| Host OS type |
|
