For the iSCSI protocol, you configure the switches and
configure networking on the array side and the host side. Then you
verify the IP network connections.
Configuring the switches - iSCSI, Windows
You configure the switches according to the vendor’s recommendations for iSCSI. These recommendations might include both configuration directives as well as code updates.
Configuring host-side networking—iSCSI
You must configure iSCSI networking on the host side so that the Microsoft iSCSI Initiator can establish sessions with the array.
Recording iSCSI-specific information for Windows
Select the iSCSI worksheet to record your protocol-specific storage configuration information. You need this information to perform provisioning tasks.