To configure FC zoning, you must determine the worldwide port name (WWPN) of each initiator port.
-
Connect to the ESXi host using SSH or the ESXi shell.
-
Run the following command:
-
Record the initiator identifiers. The output will be similar to this example:
vmhba3 lpfc link-up fc.20000090fa05e848:10000090fa05e848 (0000:03:00.0)
Emulex Corporation Emulex LPe16000 16Gb PCIe Fibre Channel Adapter
vmhba4 lpfc link-up fc.20000090fa05e849:10000090fa05e849 (0000:03:00.1)
Emulex Corporation Emulex LPe16000 16Gb PCIe Fibre Channel Adapter