You use the Setup wizard in ThinkSystem System Manager to configure your storage array.

Before you begin

  • You have ensured that the device from which you will access ThinkSystem System Manager contains one of the following browsers:

    Browser Minimum version

    Google Chrome

    47

    Microsoft Internet Explorer

    11

    Microsoft Edge

    EdgeHTML 12

    Mozilla Firefox

    31

    Safari

    9

  • You are using out-of-band management.

About this task

If you are an iSCSI user, you closed the Setup wizard while configuring iSCSI.

The wizard automatically relaunches when you open System Manager or refresh your browser and at least one of the following conditions is met:

  • No pools and volume groups are detected.

  • No workloads are detected.

  • No notifications are configured.

Steps

  1. From your browser, enter the following URL: https://<DomainNameOrIPAddress>

    IPAddress is the address for one of the storage array controllers.

    The first time ThinkSystem System Manager is opened on an array that has not been configured, the Set Administrator Password prompt appears. Role-based access management configures four local roles: admin, support, security, and monitor. The latter three roles have random passwords that cannot be guessed. After you set a password for the admin role you can change all of the passwords using the admin credentials. See ThinkSystem System Manager online help for more information on the four local user roles.

  2. Enter the System Manager password for the admin role in the Set Administrator Password and Confirm Password fields, and then click Set Password.

    When you open System Manager and no pools, volumes groups, workloads, or notifications have been configured, the Setup wizard launches.

  3. Use the Setup wizard to perform the following tasks:

    • Verify hardware (controllers and drives) — Verify the number of controllers and drives in the storage array. Assign a name to the array.

    • Verify hosts and operating systems — Verify the host and operating system types that the storage array can access.

    • Accept pools — Accept the recommended pool configuration for the express installation method. A pool is a logical group of drives.

    • Configure alerts — Allow System Manager to receive automatic notifications when a problem occurs with the storage array.

    • Enable AutoSupport — Automatically monitor the health of your storage array and have dispatches sent to technical support.

  4. If you have not already created a volume, create one by going to Storage > Volumes > Create > Volume.

    For more information, see the online help for ThinkSystem System Manager.