System Manager 11.70.1 - Suspend and resume synchronization for a mirrored pair

You can use the Suspend option and Resume option to control when to synchronize the data on the primary volume and the secondary volume in a mirrored pair.

About this task

If a mirrored pair is manually suspended, the mirrored pair will not synchronize until it is manually resumed.

Select Storage > Synchronous Mirroring .
Select the mirrored pair that you want to suspend or resume, and then select either More > Suspend or More > Resume .
The system displays a confirmation.
Select Yes to confirm.

What happens next?

System Manager performs the following actions:

Either suspends or resumes data transfer between the mirrored pair without removing the mirror relationship.
For a
suspended mirrored pair:
- Displays
  Suspended in the Mirrored Pair table.
- Logs any data that was written to the primary volume of the mirrored pair while synchronization is suspended.
For a
resumed mirrored pair, writes the data automatically to the secondary volume of the mirrored pair when synchronization is resumed. A full synchronization is not required.