You can configure alerts to be sent by Simple Network Management Protocol (SNMP) traps.
Configure SNMP alerts
To configure Simple Network Management Protocol (SNMP) alerts, you must identify at least one server where the storage array's event monitor can send SNMP traps. The configuration requires a community name or user name, and an IP address for the server.
Configure SNMP MIB variables
For SNMP alerts, you can optionally configure Management Information Base (MIB) variables that appear in SNMP traps. These variables can return the storage array name, array location, and a contact person.
Delete trap destinations
You can delete a trap destination address so that the storage array's event monitor no longer sends SNMP traps to that address.