How tos

I want to

Configure management port
The controller includes an Ethernet port used for system management. If necessary, you can change its transmission parameters and IP addresses.
Configure iSCSI ports
If your controller includes an iSCSI host connection, you can configure the iSCSI port settings from the Hardware page or the System page.
Configure NVMe over RoCE ports
If your controller includes a connection for NVMe over RoCE (RDMA over Converged Ethernet), you can configure the NVMe port settings from the Hardware page.
Configure NTP server addresses
You can configure a connection to the Network Time Protocol (NTP) server so that the controller periodically queries the NTP server to update its internal time-of-day clock.
Configure DNS server addresses
Domain Name System (DNS) is used to resolve fully qualified domain names for the controllers and a Network Time Protocol (NTP) server. The management ports on the storage array can support IPv4 or IPv6 protocols simultaneously.
View controller settings
You can view information about a controller, such as the status of the host interfaces, drive interfaces, and management ports.
Allow remote login
Remote login lets users from outside of the local area network start an SSH session and change settings on the controller.
Place controller online
If a controller is in the offline state or in service mode, you can place it back online.
Place controller offline
If you are instructed to do so, you can place a controller offline.
Place controller in service mode
If you are instructed to do so, you can place a controller in service mode.
Reset (reboot) controller
Some issues require a controller reset (reboot). You can reset the controller even if you don't have physical access to it.

Parent topic: Controllers